ADVERTISEMENT
5. π§Ό Clean the Drain Filter and Pump
Cause: A clogged pump can cause imbalance during the spin cycle.
- Open the bottom panel or drain door (usually in front).
- Place a towel and shallow pan β water may spill out.
- Clean out the filter and check for lint, coins, or debris.
π‘ This also helps prevent musty odors and drainage issues!
π§― Still Noisy? When to Call a Professional
If youβve checked all of the above and your washer is still shaking, knocking, or walking across the room, it may be time to:
- Replace drum bearings
- Repair or replace the motor
- Fix internal suspension systems
π Final Tip: Prevent It from Happening Again
- Always balance your loads (especially with towels, rugs, and heavy blankets).
- Level your machine after moving it.
- Clean out the pump filter monthly.
- Donβt ignore the shaking β the longer it continues, the more damage it causes.
π§° In Summary:
Do this before calling a repairman:
- β Balance the load
- β Level the machine
- β Remove shipping bolts (if new)
- β Inspect for worn or loose parts
- β Clean the drain filter
Sometimes the fix is quick and free β all it takes is a little troubleshooting. So before you spend money on a technician, try these steps and give your washer a chance to calm down!